Field mount electropneumatic actuator
- Current to pressure converter (I/P)
- 0/4... 20 mA control signal
- 0.2... 1 bar or 3... 15 psi output
- Process connection: 1/4 NPT
- Pipe mount bracket Ø62 mm or wall mount
Process inputs:
1 High level analogue input
- Current (mA): 0/4... 20 mA
Input impedance: 200 Ω
Process outputs
Pressure output:
- 0.2... 1 bar or 3... 15 psi
- Air capacity (max.): > 5 kg/h = 4.1 Nm3/h = 2.4 scfm
Supply pressure:
- 1.4 ± 0.1 bar or 20 ± 1.5 psi
(for output signal 1 bar or 15 psi)
Functions
Transmission data and influences:
Characteristic: - Linear, direct or reverse action
Deviation: < 0.5 %
Hysteresis: < 0.3 %
Dead band: < 0.1 %
Temperature:
< 0.5 %/10 K between -20 and +85 °C
< 2 %/10 K between -55 and -20 °C
Air supply
< 0.3 %/0.1 bar pressure change
Installation
Mounting method:
- Wall Mount
- 2” pipe field mounting
Case dimensions: 136 x Ø75 mm
Pipe mount bracket dimensions:
- Dimension: Ø62 mm
- Total width: 100 mm
Wall mount bracket dimensions:
Total width: 88 mm
Connections
Signals connection: 2,5 mm² screw terminals block
Process connection: 1/4 NPT
Air supply connection: 1/4 NPT
Protection factor: IP 65
Connectable to: Any controller from Ascon Tecnologic range with the appropriate I/Os