1/16 DIN temperature controller for hot runners
- Panel mount controller: 48x48 mm
- 1 Configurable input, 1 C/T input and 1 digital input
- Up to 3 Digital outputs
- PID single action or double action (Heat/Cool)
- Setpoint change from digital input (optional)
- Outputs at safety value in case of error
- 2 display lines, 4 digits each, green colour
Process inputs:
1 Universal input
- Thermocouples: J, K, L, S, T
- RTD: Pt100
- Voltage (mV): 0/10...50 mV
- Current (mA): 0/4...20 mA (with 2.5 Ω shunt resistor)
- Custom linearisation and IR probes (J.K type)
Accuracy : 0.25% ±1 digit (probes) or 0.1% ±1 digit (mA or mV)
Auxiliary input(Optional)
- 1 current transformer input for load monitoring (optional) 50 or 100 mA jumper selectable
1 digital input
- NPN
- TTL
- Free Voltage
Keyboard
Mechanical: 4 multifunction keys
Process outputs
Up to 3 Digital outputs
OUT1
- RELAY SPST-NO, 2A/250Vac
OUT2
- RELAY SPST-NO, 2A/250Vac
- SSR Drive 0...5Vdc, ±20%, 30 mA Max (Note 1)
OUT3
- RELAY SPST-NO, 2A/250Vac
Power supply:
- 24VDC/VAC
- 100… 240 Vac (50/60 Hz)
Functions
- ON/OFF control
- PID single action or double action (Heat/Cool)
- Setpoint change from digital input (optional)
- Outputs at safety value in case of error
Autotuning
- Autotuning with natural frequency
- Autotuning with step response
- Adaptive Autotuning
Alarms
- Up to 2 configurable alarms
Communication and programming:
Interfaces
- APG2-DRSPC interface for simultaneous setpoint change of up to 48 controllers
- Easy to use front interface for configuration
Programming/configuration tools:
- Code selection
Installation
Mounting method: panel mount
Case dimensions: 48 x 48 mm (1/16 DIN)
Connections
Signals connection
18 poles 5.5 mm² screw terminals block
Protection factor: IP 65 front protection
Display and indicators
2 display lines, 4 digits (PV) h: 10 mm, 4 digits (SP/OP) h: 8 mm, green colour
3 LED Bargraph + 2 Alarm and 1 Transmission LEDs
Connectable to:
- APG2-DRSPC interface for simultaneous setpoint change of up to 48 controllers
Used for:
- Hot runner
- Extruders
File no. E176452
Ref. UL 504