Temperature controller with speed feedback control
- Dimensions 78 x 35 mm, depth 87 mm
- Front protection degree IP20
- 1 input for temperature probes: tc J, K, S, R, T, J and K infrared sensors, RTD PT1000 and Pt 100 2-wire, PTC KTY81-121 (990Ω@25°C); NTC 103AT- 2 (10KΩ@25°C), for mV signals 0/12... 60 mV or normalized signals 0/4... 20 mA, 0/1... 5 V, 0/2... 10 V
- Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% of span ± 1 digit
- 1 digital input from free voltage contact + 1 digital input available when I/O4=DI2, programmable in voltage (24 VDC) or from freed voltage contact
- Power supply: 24 VAC / VDC ± 10%, 100 ... 240 VAC / VDC (-15% / +10%) Frequency: 50/60 Hz
- Power consumption: 7 VA max.
- OUT1: PWM feedback for motor speed control 24 VDC max 3A
- OUT2 + OUT3: Relay SPST-NO 2A/240 Vac or in tension to drive SSR 13V @ 1mA max, 10.5 V min @ 15 mA ± 10% or Relay SPST-NO 2A/240 Vac for SERVOMOTOR control
- OUT4 programmable: voltage to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or power transmitter, or digital input
- SERVOMOTOR drive
- Serial Communications: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU (JBUS)
- Communication speed: 1200... 38400 baud
- 3 configurable alarms as absolute, deviation and band
- 4 selectable Set Point + 4 speeds selectable individually or as a recipe
- PID control with single or double action with overshoot control, ON/OFF, ON/OFF Neutral Zone, Auto-tuning, Self-tuning
- Programmer 8 segments with guaranteed soak
- Independent timer with 5 operating modes
- Hour counters: a cumulative non-erasable counter and a second counter with alarm resettable
- Connections: 16 screw terminals 2.5 mm ² (AWG14... AWG22) fix, removable or clamp type
