Servomotor controller
- Dimensions 48 x 96 mm (1/8 DIN), depth 89 mm
- Front protection degree IP54, with gasket
- Triple LED display:
- Upper display: 4 digit, 3 dynamic colours red, green and amber or a fixed color selectable, h 15.5 mm
- Central display: 4 digit, green colour, h 10 mm
- Lower display: 2 digit and half, green colour, h 10 mm - 1 input for temperature probes: tc J, K, S, R, T, J, normalized signals 0/4 ... 20 mA
- Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% of span ± 1 digit
- 1 input for potentiometer 100 ohm... 10k ohm (optional)
- 1 digital input for free voltage contacts
- 1 digital input for voltage contacts (24 VAC/VDC or 100/230 VAC) (optional)
- Power supply: 100 ... 240 VAC / VDC (-15% / +10%) Frequency: 50/60 Hz
- Outputs:
- OUT1: Relay SPST-NO 2A/240 Vac (for servomotor drive) or analogue galvanically isolated 0/4... 20 mA, 0/2... 10V
- OUT2: Relay SPST-NO 2A/240 Vac (for servomotor drive)
- OUT3: Relay SPST-NO 2A/240 Vac
- OUT4: min@15 mA ±10%">Relay SPST-NO 2A/240 Vac - 2 configurable alarms as absolute, deviation and band
- 4 selectable Set Point
- Serial Communications: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU (JBUS)
- Communication speed: 1200... 38400 baud
- PID control with single action (direct or reverse) for SERVOMOTOR drive or linear (mA/V), PID double action, ON/OFF, ON/OFF Neutral Zone, Autotune EVO-tune, Overshoot control
- Self-calibration potentiometer
- Self-paced running time servomotor
- EVOgreen function: stand by mode of display (selectable)
- Connections: 24 screw terminals 2.5 mm ² (AWG14 AWG22. ..) fix type
Note: Special versions have been developed for special markets and specific requirements.