- rear wiring socket with clips ERDL2/CA
- rear wiring socket / PCB mounting ERC2/CA
- front wiring socket / screw terminals EVB2/CA
Flashing relay with fixed rythm - 2 CO contacts - 5 A.
Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage (see our withdrawal guide inthe technical support pages of this site).
Pluggable on the following sockets : EVB2/CA, ERC2/CA and ERDL2/CA.
* rythm : fixed
* flashing frequency : 60 to 120 beats per minute at nominal voltage (possible decrease of the frequency by connecting an external capacitor between terminals +14 and -15).
This relay is specifically designed for the switching of incandescent lamps
CONTACTS RATING :
Voltage Lamp Contacts rating
125 V AC/DC 75 W-0,6 A 8 millions operations
" " 100 W-0,8 A 6 " "
" " 150 W-1,2 A 4 " "
220 " 75 W-0.34 A 8 " "
" " 200 W-0,9 A 2 " "
|Connection||on front or rear wiring socket|
|Number of mechanical operations||35.000.000|
|Operating temperature||- 5°C to + 40°C|
|Storage temperature||- 40°C to + 70°C|
|Climatic protection||optional reinforced climatic protection|
|Shock voltage||5 KV (wave 1,2/50 µs)|
|Dielectric strength||2200 V eff|
|Insulation resistance||NFC 45-202 : C500 - VDE0110 : C380|
|Protection level||IP 40 (according to NFC 20-010)|
|Resistance to mechanical shocks||severity 50 A (NFC 20-608 & CEI 68-2-27)|
|Resistance to vibrations||0,35 mm / 10-55 Hz|
|Direct current||Alternative current|
|Min. nominal voltage DC||12 V||12 V|
|Min. nominal voltage AC||230 V||380 V - 50/60 Hz|
|Operating range||-20/+10% of nominal voltage|
|Power requirement||2,5 W (7 W as a peak)|
|Number of contacts||2|
|Max. load current||5 A per contact|
|Low power switching||40 W|
. CAK relay with reinforced climatic protection
. CAK relay with more rapid rythm
. CAK relay with high contacts rating.
Homologations & conformities :
* CEI 255-1-00
* NFC 45-250